Battery charger 12 Volt - 5A, 8-stage
Gwarantowana Bezpieczna płatność
| Numer artykułu | WF-882693 |
| Marka | Dino |
Recenzje
Nie ma jeszcze żadnych recenzji — Twoja może być pierwsza
Podziel się opinią o tym zakupie i pomóż innym klientom dokonać właściwego wyboru
Pytania
Nie ma jeszcze pytań
Zadaj pytanie, aby dowiedzieć się więcej o produkcie
0.0
0 reviews
- 8 charging steps for a long battery life
- Pulse charging for maximum battery life
- Revives deeply discharged vehicle batteries
- Battery refresh function
- 4 charging programs
- Trick charging up to 200Ah
- Breaking up sulfation
- Soft-start function
- Battery capacity test
- Multiple overload protection
- Suitable for continuous charging
- For all common 12V lead-acid batteries 10Ah-120Ah
- Microprocessor controlled
- Absorption: 14.4V, 14.7V, 15.8V
- Trick charging up to 200 Ah
- Battery capacities: 10 Ah to 120 Ah
- Maximum charging current 5.0 A
- Cable length of continuous charging cable: 1.55 m
- Cable length of clamp cable: 1.55 m
- Cable length of power cable: 1.5 m
- Cable with quick connectors
- Protected against water jets from any angle (IP65)
- Reverse polarity protection, overheating protection, overload protection, short circuit protection
Special charging functions
Refresh mode: The refresh function increases performance and extends the life of the battery.AGM/Frost mode: Frost & AGM function for an adapted charging process at low temperatures below 4°C or for AGM batteries.
Step 1 (Breaking down sulfation) Detects batteries affected by sulfate deposits and removes these deposits using pulsating current and voltage to restore optimal battery capacity.
Step 2 (Soft Start)
Tests the battery's charging capability and only starts the charging process if the result is positive. This prevents damage.
Step 3 (Charging up to 80%)
After a successful test, charges the battery with maximum current up to a charge level of approximately 80%.
Step 4 (Charging up to 95%)
Charges with decreasing current up to a charge of 95%.
Step 5 (Capacity Test)
Tests the battery for charge retention. Indicates when the battery cannot maintain the voltage. Defective batteries are indicated by the red LED and should be replaced.
Step 6 (Refresh 100%)
Select Refresh by pressing the Mode button to incorporate this mode into the automatic sequence. The Refresh function causes a controlled degassing of the battery acid. This ensures full charge and increases the battery's durability and performance.
Step 7 (Trick Charge)
Charge maintenance at constant battery voltage and low charging current
Step 8 (Pulse Charge 95-100%)
If the voltage drops below 95%, 100% of the charge is restored with charging pulses, preventing re-sulfation.
Scope of delivery
Charger (protection class IP65)Charging cable with clamps (protection class IP65)
Charging cable for permanent installation (protection class IP65)
Instructions for use
Nazwa podmiotu odpowiedzialnego w UE:
Ulica przedstawiciela w UE:
Podmiot odpowiedzialny w UE nr domu:
Kod pocztowy podmiotu odpowiedzialnego w UE:
Odpowiedzialne miasto (UE):
Odpowiedzialne państwo UE:
E-mail osoby odpowiedzialnej w UE:
Telefon osoby odpowiedzialnej w UE:
Załącznik GPSR: